Loading...
Products
Explore our comprehensive range of laboratory equipment
Showing 1-11 of 11 products
Digtor 22 C
by Orto Alresa
Oil Centrifuge Series
With capacity for 4 tubes of 8”, 6”, trace and 28 “finger” tubes. Versatile and effective is the better option out of all the centrifuges for oil applications.
Digtor 22 C-8
by Orto Alresa
Oil Centrifuge Series
The largest of our centrifuges for oil, with capacity for 8 tubes of 8”, the best option for centres that carry out a large number of tests every day.
Digtor 22 C-U
by Orto Alresa
Oil Centrifuge Series
The most affordable option in the range of centrifuges for oil laboratories that, due to regulations, do not require heating. It has the same accessories as the heated models, all of them are especially designed for working with oily substances as well as the reagents used in regulations applicable with oil. Effective, quick, versatile, allowing you to work with 6” and 8” conical profile tubes, pear type tubes and “finger” type tubes for small volumes. It has a pre-installation for incorporating a gas release system at any time during the life of the equipment.
InfraCal 2 ATR-SP
by Spectro Scientific
Measuring Oil In Water & Soil
The InfraCal Model ATR-SP is recommended for measuring oil in water, TPH in soil or FOG in wastewater concentration levels when using hexane, pentane or Vertrel MCA as the extracting solvent. Measurement data obtained with this analyzer will correlate to EPA Method 1664 as both procedures are based on evaporation techniques and measuring the residual oil and grease. The analyzer is equipped with a built-in cubic zirconia horizontal attenuated total reflection (HATR) stainless steel sample stage. The InfraCal 2 ATR-SP is a direct replacement for the original InfraCal HATR-T2 used worldwide for the determination of TOG/TPH in water and soil.
InfraCal 2 TRANS-SP
by Spectro Scientific
Measuring Oil In Water & Soil
The InfraCal 2 TRANS-SP is recommended for measuring oil in water, TPH in soil or FOG in wastewater concentration levels using the traditional EPA methods 413.2 and 418.1 or ASTM method D7066-04 and Freon-113, hydrocarbon-free grade of perchloroethylene, AK-225, S-316 or other spectroscopic infrared transparent solvent as the extracting solvent. Since the extract is deposited into a 10 mm quartz cuvette cell with Teflon stopper, light end volatile components are retained for measurement. Accurate down to 0.1 ppm. The InfraCal 2 TRANS-SP, the latest introduction to our easy to use analyzers, uses the same measurement technology as the original InfraCal Model CVH, with added features such as data storage and transfer, multiple calibrations and password protection for instrument settings.
Model CPC-D97-B-X
by Forza International
Fuel Analysis Equipment
ASTM D97 | ASTM D2500 | ASTM D6371 – Aluminum block (DRY) apparatus for the cold flow properties analysis Cloud, Pour Point and CFPP Aluminum block (Dry Bath) Apparatus CPC-D97-B-X. Manual aluminum block (DRY) bench top apparatus, engineered with Stirling Cryo cooling system capable of reaching -70°C. Four and five temperature position units are available, with four or eight test jackets for each temperature position.
Model CSC-D130-L-8
by Forza International
Fuel Analysis Equipment
ASTM D130 – Apparatus for Copper Strip Corrosion test Model CSC-D130-L-8 : Manual stainless steel liquid bath for both pressure vessel & test tube procedures. 8 positions model available.
Model FZ-D2386-L-2
by Forza International
Fuel Analysis Equipment
ASTM D2386 – Apparatus for the determination of Freezing Point of aviation Fuels. Model FZ-D2386-L-2 : Manual low temperature (-70’c) Liquid bath for the determination of the temperature below which solid hydrocarbon crystals may form in aviation turbine fuels and aviation gasoline. Conforms to method ASTM D2386
Model OX-D525-B
by Forza International
Fuel Analysis Equipment
Oxidation Stability of Gasoline and Aviation Fuels OX-D525-B Test Apparatus for Oxidation Stability of Gasoline and Aviation Fuels. ASTM D525, ASTM D873,IP 138, ISO 7536, IP 40. Model OX-D525-B-X: Heated aluminum block apparatus with automatic data acquisition system. 4 and 6 positions models available.
Model OXY-D2274-IHT-X
by Forza International
Fuel Analysis Equipment
ASTM D2274 – Apparatus (Liquid) for the determination of Oxidation Stability of Distillate Fuel Oil (Accelerated Method) Model OXY-D2274-IHT-X : Manual Individual heated tube apparatus (dry) for oxidation stability of distillate fuel oil (Accelerated method). 4, 6, and 8 positions models equipped with Rotameter / MFC available.
Model RU-TM0172-L-6
by Forza International
Fuel Analysis Equipment
NACE TM0172 - Apparatus for the evaluation of Corrosive Properties of Insoluble Petroleum Product Pipeline Cargoes Model RU-TM0172-L-6-: Manual Liquid Bath for corrosive properties of liquid petroleum products/liquid hydrocarbon products that are not water soluble, for transport through a steel pipeline. 4 and 6 positions models available.